Learning The “Secrets” of Resources

Several Easy Ways to Put Off Trailer Sway

There are different types of trailers, which include general hauling utility, vehicle hauling car, camping and enclosed cargo trailers. There are times when they have this unwanted back and forth motion called sway, which can lead to an accident if it gets severe. You can avoid this from happening if you know how to correctly set up your trailer and tow vehicle. It depends also on various factors, including tire pressure, the hitch, the coupling, weight and tongue weight so you have to have a friction sway device and an air pressure gauge.

You need to bear in mind that 10 to 12 percent of trailer weight should be on the tongue that is found at the front of the vehicle. The sway can take place if there is too much weight at the back of the vehicle so it is important to weight your trailer at a truck shop before loading it. The shop attendant can assist to split-weight your trailer so you will know what weight your tongue is. You can reorganize the load to get correct tongue weight by taking out some items if overloaded and weighing it gaining.

Be sure to read the manufacturer’s manual to make out the maximum load capacity. It will also indicate the appropriate class hitch for the vehicle so that your tow vehicle won’t get overloaded. The total weight of the cargo, trailer tongue and passengers must not go beyond the vehicle’s weight capacity.

It is also important to have correct air pressure in your trailer and tow vehicle tires. The owner’s manual has a suggested exact tire pressure both for the vehicle and the trailer. You can check the tire pressure using the air pressure gauge but the tire must be already cold during checking. When you have just been driving the vehicle, you must allow the tires to cool down prior to checking the pressure.

You should not drive the trailer during extreme windy conditions to avoid being blown over. If severe weather condition is predicted, postpone your trip until it is calm. Your tow vehicle should only be driven during cool weather so it won’t get blown away.

You can ask your dealer to install a friction sway device in your vehicle while having a test drive taken to guarantee that everything is installed properly. Once sway is still there, you ought to rotate clockwise the adjustment handle until it is gone and the trailer is stabilized. The sway control device can be already installed on each side of the hitch once you have a large trailer.

When towing, your driving speed must be altered since the extra heavy weight does not permit fast driving. Once you notice that sway starts, steer clear of highways, changing lanes frequently or passing tractor trailers. These instances will trigger the trailer to sway and this can result in a road accident.